DIFFERENT MEASUREMENTS AND THEIR UNITS

Whether dimensional, angular, electrical, optical, or related to time, measurements are essential in watchmaking manufacturing processes. They themselves work as instruments capable of compiling numerous measurements. In watchmaking, units of measurement are often adapted and calibrated to the industry’s specific needs.

TIME

Whether indicating time or measuring a defined period, be it long or extremely short, time measurement employs a wide range of units of measurement. Even the division of the hour can change and become decimal in specific cases. We address here the units most commonly encountered in watchmaking.

MASS

Some components must be lightweight, while others are heavy. Some must be balanced, while others need not be. Mass and inertia are values constantly present in watchmaking regardless of production methods or a component’s nature.

LENGTH AND ANGLES

Contrary to most industries, the unit of length measurement used in watchmaking is the millimetre. This choice was made due to the limited dimensions of a watch, its components, and the precision they require. Angular measurements are traditionally expressed in degrees and all their subdivisions (angular minutes, angular seconds, etc.).

TEMPERATURE

In many manufacturing processes, strict temperature control is essential. Temperature and its variations also have a significant impact on the mechanism of a watch (especially mechanical ones). Depending on the situation, Celsius, Fahrenheit, or Kelvin units can be used, requiring a high level of precision and advanced measurement technology. In other cases, measurements may be more empirical. For example, the temperature of tempering is evaluated by the eye based on the colours the steel takes on as its temperature rises (e.g., straw yellow = approx. 230°C, dark blue = approx. 288°C).

ELECTRICAL MEASUREMENTS

While there is, by definition, no electrical presence in a mechanical watch, electricity and electronics are present in most time measurement devices. The first electric clocks were produced in the first half of the 19th century. Today, some clocks and watches are occasionally equipped with hybrid movements (electro-mechanical). Electricity powers the workshops, and some machines use electricity as a tool. For example, an electric arc cuts material in electrical discharge machining or welds two parts of tweezers together. And an electric current “carries” material during electroplating processes. Electrical measurements are thus omnipresent in modern watchmaking, whether artisanal or industrial.

OPTICS & LIGHT INTENSITY

These fields are present in various stages or processes of watchmaking. Light is used in chemical etching methods or to polymerize a composite adhesive or lacquer. Optics, on the other hand, finds most of its applications in dimensional control, especially in production. Regarding the watch itself, measurements related to optics and light specifically concern displays (luminous material intensity, UV resistance, refraction, diffraction, etc.).

FREQUENCY

This is the number of times a periodic phenomenon repeats within a defined duration. In watchmaking, the most common frequency measurement is that of the oscillator. This is commonly expressed in two distinct units: the number of alternations per hour (A/h) or the number of oscillations per second (Hertz, Hz). For example, 18,000 A/h is equal to 2.5 Hz.

HARDNESS

The hardness of a material determines many characteristics of a component: its resistance to wear, shock, or scratches, and its coefficient of friction. As a rule, a tool must be harder than the material it works on. Hardness is an essential criterion for the practical properties of a component as well as for the means required to manufacture it. Many units of measurement exist and are used, as do many standardized hardness test methods.

BECOME A CONTENT CONTRIBUTOR

HOROPEDIA is a participative knowledge platform and we invite all those who wish to contribute to this adventure of sharing watchmaking knowledge to join us.

It can be additional explanations, images or other illustrations or terms not yet identified that deserve to be.